Have you considered how enduring and burdensome it is to acquire a wonderful finish for your wood floor? How do you again ensure that your finish will take you into the future? Surely you have to pay good attention to coating, stain and sealant to be certain your finish will see tomorrow.
You have done almost all the necessary things you have to do before the floor comes in, the sanding, levelling and the covering. All what are waiting is the products you will use for the floor. But before you visit the shop, remember it is better you have in mind exactly what you will need before you go.
These are the different products you are likely to meet at the home makeup shop, shellac, lacquer, surface finishes, varnish and penetrating sealers.
But even before you do some purchasing ask yourself these questions, what is the floor going to be used for? Is it going to attract a large number of people? Must you give it a hard surface? Should it be water resistant or one that is very easy to tidy? If yes then your floor will need many coats of oil related polyurethane.
Your floor will now get the lustre finish and the guard it needs. But know that with time your floor will give up the best of its colour, normally yellow or fading yellow.
For most brands of surface finishes, a minimal of 2 coating will be fine but with a third or a fourth you can be sure of a perfect output. You will also find out that some of the finishes dry faster than others; while some take few hours to dry other can take a day or more.
You again have been guided to ensure free air flow in the chamber of the floor because the finishes can give out hard vapour. Try and leave the window or door open to ease that tension.
And when you do these necessary measures, especially giving it the right number in coat and making sure of proper drying of your finishes. You stand a great chance of using it for a very long period without any problem.
Refer to additional pieces of work by this same writer covering items including clawfoot tub and acrylic panel.